Construction Fixings
  steel anchorschemical anchoringgeneral fixingsboltingscrew productsother products

bolting products

 
 

Hexagon High Tensile Bolts

  The following selected items comprise our most popular products from our steel bolting and threaded fastener range for general and structural steel and timber fabrications and installations.

As ever, our sales and technical departments are always available to provide full technical support required for product selection and installation advice, catalogue prices are discounted per enquiry through our sales department.

Finish Key

The following refers to the abbreviations used throughout our site for current available material finishes, however we can plate any item to your requirements. Minimum quantities may apply.

  • SC - Self colour ( raw material as manufactured)
  • BZP - Bright zinc plated
  • HDG - Hot dipped galvanised
  • ZPYP - Bright zinc plated with an applied yellow passivate



If you would like any further details about our range, require more product information or have a technical query you can contact us using our online form here or telephone our sales and technical departments on 0121 506 6300 (UK), or you can email us at

sales@heads.co.uk

Information
Ordering Information
Delivery Details
Payment Information
Terms and Conditions
Company Profile

Ordering
Lines open 8.00 to 5.00
Monday to Friday

Domestic tel - 0121 506 6300 International tel - +44 121 506 6300
Domestic fax - 0121 506 6301 International fax - +44 121 506 6301

 

 
 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

  construction fixings general catalogue
 

 

click image to go to our download area where you can download our general catalogue in full section format or contact us if you would like a hard copy

   
 

 

 

 

 

 

 

 

 

 


construction fixings

 


 

 


high tensile bolts grade 8.8 and stainless steel grades A2 304 and A4 316 Hexagon bolts
High tensile steel Gr 8.8 hex bolts to current DIN and British standards, batch traceable, manufactured from Gr 4.6 mild steel, high tensile Gr 8.8 steel and A2 304 and A4 316 stainless steels to current standards.
Standard size range : diameters M5 up to M64 and lengths from 25mm up to 400mm
Finishes available : SC/BZP/HDG/ZYP
catalogue page steel catalogue page stainless steel

high tensile fully threaded bolts grade 8.8 and stainless steel grades A2 304 and A4 316

Hexagon head setscrews

Hex head setscrews from stock are the fully threaded version of a hex bolt manufactured from Gr 4.6 mild steel, high tensile Gr 8.8 steel and A2 304 and A4 316 stainless steels to current standards.
Standard size range : diameters M3 up to M64 and lengths from 6mm to 200mm
Finishes available : SC/BZP/HDG/ZPYP
catalogue page steel catalogue page stainless steel
 
mild steel bolt and nut assemblies

XOX hex bolts

XOX hex bolt set supplied as an assembly comprising a mild steel Gr 4.6 hexagon bolt complete with hex nut
Standard size range : M8 – M30 up to 300mm long
Finishes available : SC/BZP/HDG
catalogue page
 
high strength grade 10.9 structural bolts

High strength structural bolts

High strength structural hexagon bolt in 10.9 grade high tensile steel for use with corresponding gr10 hex nuts.
Standard size range : M6 - M24 up to 300mm long
Finishes available : SC/HDG
catalogue page
 
high strength grade 10.9 structural fully threaded bolts

High strength structural setscrews

High strength structural hexagon setscrews in 10.9 grade high tensile steel for use with corresponding gr10 hex nuts.
Standard size range : M6 - M24 up to 160mm long
Finishes available : SC/HDG
catalogue page
 
high strength friction grip bolts or hsfg

HSFG bolts

HSFG or high strength friction grip bolts to BS4395 in 8.8 grade high tensile steel generally sold as an assembly with a corresponding grade 8 high tensile hex nut, one load indicating washer and one thru hardened washer for structural steelwork
Standard size range : M6 - M24 up to 120 mm long
Finishes available : SC/HDG
catalogue page
 
indented foundation bolts and holding down bolts Foundation bolts
Indented foundation bolts & square/square hex holding down bolts to BS 7419 in 4.6 grade mild steel and 8.8 and 10.9 grade high tensile steels along with A2 304 and A4 316 stainless steels. Square head bolt accessories include a full range of washer plates and wax, eml or polystyrene bolt boxes.
Standard size range : M6 - M24 up to 120 mm long
Finishes available : SC/HDG/BZP
catalogue page
 
cup square hex or carraige bolts domed head Cup square hex carraige bolt
Cup square hex carraige bolt and nut grade 4.6 mild steel and A2 304 and A4 316 grade stainless steels for bolting of timber sections together or to steelwork.
Standard size range : M8 – M20 up to 400mm long
Finishes available : SC/BZP/HDG
catalogue page catalogue page stainless steel
 
threaded bar in mild steel 8.8 high tensile steel A2 304 and A4 316 stainless steel Threaded bar
Threaded bars in grade 4.6 mild steel, gr 8.8 high tensile steel and A2 302 and A4 316 stainless steels for general construction and engineering use.
Standard size range : M2 - M64 in lengths 0.5m, 1m, 2m, 3m. specials on request.
Finishes available : SC/BZP/HDG
catalogue page catalogue page stainless steel
 
roofing bolts and nuts Roofing bolt and nut
Grade 4.6 mild steel roofing bolts supplied with corresponding square nuts
Standard size range : M5 - M12 in lengths up to 220mm
Finishes available : SC/BZP/HDG
catalogue page
 
socket cap screws Socket cap screw
Grade 12.9 high tensile cap screws to DIN 912 standard, available also in A2 304 and A4 316 stainless steel , allen key drive
Standard size range : M2 - M30 up to 300 mm long
Finishes available : SC/BZP/ZYP
catalogue page catalogue page stainless steel
 
socket button head screws Socket button screws
Grade 12.9 high tensile button head screws to DIN 7380 standard, available also in A2 304 and A4 316 stainless steel, allen key drive
Standard size range : M3 - M12 up to 120 mm long
Finishes available : SC/BZP/ZYP
catalogue page catalogue page stainless steel
 
socket countersunk screws Socket countersunk screws
Grade 12.9 high tensile countersunk head screws to DIN 7991 standard, available also in A2 304 and A4 316 stainless steel, allen key drive
Standard size range : M3 - M24 up to 150 mm long
Finishes available : SC/BZP/HDG
catalogue page catalogue page stainless steel
 
pan head machine screws in steel and A2 304 and A4 316 stainless steel Machine screws pan head
Gr 4.6 mild steel slot pan head metric thread screws to DIN963 specification in slotted or pozi drive formats, also available in A2 304 and A4 316 stainless steel
Standard size range : M2 - M12 up to 100 mm long
Finishes available : SC/BZP
catalogue page catalogue page stainless steel
 
countersunk machine screws in steel and A2 304 and A4 316 stainless steel Machine screws countersunk
Gr 4.6 mild steel pan head metric thread screws to DIN963 specification in slotted or pozi drive formats, also available in A2 304 and A4 316 stainless steel
Standard size range : M2 - M20 up to 140 mm long
Finishes available : SC/BZP
catalogue page catalogue page stainless steel
 
hexagon nuts Hexagon nuts
a comprehensive range of grade 8 high tensile hexagon nuts for use with all our threaded fasteners, also available nyloc insert nuts, 1/2 lock nuts, dome nuts, wing nuts, castle nuts and flange nuts. A2 304 and A4 316 stainless steel also available.
Standard size range : M2 - M64
Finishes available : SC/BZP/HDG/ZYP
catalogue page catalogue page stainless steel
 
washers

Washers

A complimentary range of washers including Form A plain washers, repair, spring and shakeproof, square plate, load indicating, thru hardened and taper washers in mild, high tensile and stainless steels.
Standard size range : M2 - M64
Finishes available : SC/BZP/HDG/ZYP
catalogue page catalogue page stainless steel

 


For specials enquiries or information on our full fastener range or for any advice on our bolting products please feel free to contact our sales or technical departments anytime.

^ Top